| HYDRAULIC INJECTION MOLDING MACHINE SPECIFICATIONS | |||||
| CLAMP UNIT | UNITS | MODEL ISGS500 | |||
| CLAMP CLOSING FORCE | tons-US | 495 | |||
| tons-m | 450 | ||||
| CLAMP OPENING FORCE | tons-US | 27 | |||
| tons-m | 24.5 | ||||
| TIE BAR SPACING (H x V) | in | 34.2 x 34.2 | |||
| mm | 870 x 870 | ||||
| PLATEN DIMENSION (H x V) | in | 48.4 x 48.4 | |||
| mm | 1230 x 1230 | ||||
| CLAMP STROKE | in | 41.3 | |||
| mm | 1050 | ||||
| DAYLIGHT (OPEN/CLOSE) | in | 55.1 / 13.8 | |||
| mm | 1400 / 350 | ||||
| CLAMP SPEED (CLOSE/OPEN) | in/sec | 30 / 30 | |||
| mm/sec | 760 / 760 | ||||
| EJECTOR FORCE | tons-US | 13.5 | |||
| tons- m | 12 | ||||
| EJECTOR STROKE | in | 6.3 | |||
| mm | 160 | ||||
| INJECTION UNIT | 27AT | 27B | 34AT | 34B | |
| INJECTION CAPACITY (GPPS) | oz | 48 | 63 | 61 | 77 |
| g | 1360 | 1780 | 1730 | 2190 | |
| SCREW DIAMETER | in | 2.8 | 3.2 | 3.2 | 3.5 |
| mm | 70 | 80 | 80 | 90 | |
| INJECTION VOLUME | in3 | 90 | 118 | 115 | 145 |
| cm3 | 1480 | 1930 | 1880 | 2380 | |
| INJECTION PRESSURE | PSI | 25900 | 19800 | 26500 | 21000 |
| kgf/cm2 | 1810 | 1380 | 1860 | 1470 | |
| INJECTION RATE | in3/sec | 32 | 41 | 31 | 39 |
| cm3/sec | 520 | 680 | 505 | 640 | |
| MAX SCREW SPEED | RPM | 180 | 170 | 170 | 150 |
| RPM | 180 | 170 | 170 | 150 | |
| PLASTICIZING RATE (GPPS) | oz/sec | 2.5 | 3.3 | 3.3 | 3.9 |
| g/sec | 72 | 94 | 95 | 111 | |
| GENERAL DATA | |||||
| *CORE VOLUME CLAMP STOP | gpm | 60 | |||
| L | 227 | ||||
| *CORE VOLUME ON THE FLY | gpm | 30 | |||
| L | 113 | ||||
| RUNNING LOAD @ 460V | amps | 129 | |||
| amps | 129 | ||||
| COOLING WATER REQUIRED | gal | 13 | |||
| L | 49 | ||||
| MOTOR | HP | 75 | |||
| kw | 55 | ||||
| OIL RESERVOIR CAPACITY | gal | 343 | |||
| l | 1300 | ||||
| SHIPPING WEIGHT (EST.) | Lbs | 46,200 | 48,400 | ||
| kg | 21,000 | 22,000 | |||
| DIMENSIONS (L x W x H) | ft | 23.6x7x7 | 23.6x7x7 | ||
| m | 7.2x2.1x2.1 | 7.6x2.1x2.1 | |||
