| HYDRAULIC INJECTION MOLDING MACHINE SPECIFICATIONS | |||||
| CLAMP UNIT | UNITS | MODEL ISG1450D | |||
| CLAMP CLOSING FORCE | tons-US | 1430 | |||
| tons-m | 1300 | ||||
| CLAMP OPENING FORCE | tons-US | 105 | |||
| tons-m | 95 | ||||
| TIE BAR SPACING (H x V) | in | 52.1 x 50.4 | |||
| mm | 1325 x 1280 | ||||
| PLATEN DIMENSION (H x V) | in | 74.8 x 72.8 | |||
| mm | 1900 x 1850 | ||||
| CLAMP STROKE | in | 51.2~70.9 | |||
| mm | 1300~1800 | ||||
| DAYLIGHT (OPEN/CLOSE) | in | 78.7~98.4 / 27.5~47.2 | |||
| mm | 2000~2500 / 700~1200 | ||||
| CLAMP SPEED (CLOSE/OPEN) | in/sec | 29 / 31 | |||
| mm/sec | 745 / 775 | ||||
| EJECTOR FORCE | tons-US | 33 | |||
| tons- m | 30 | ||||
| EJECTOR STROKE | in | 9.8 | |||
| mm | 250 | ||||
| INJECTION UNIT | 110A | 110B | 150A | 150B | |
| INJECTION CAPACITY (GPPS) | oz | 213 | 250 | 277 | 348 |
| g | 6040 | 7140 | 7750 | 9730 | |
| SCREW DIAMETER | in | 4.5 | 4.9 | 4.9 | 5.5 |
| mm | 115 | 125 | 125 | 140 | |
| INJECTION VOLUME | in3 | 400 | 473 | 514 | 645 |
| cm3 | 6560 | 7760 | 8430 | 10570 | |
| INJECTION PRESSURE | PSI | 25100 | 21200 | 24900 | 19900 |
| kgf/cm2 | 1760 | 1490 | 1750 | 1400 | |
| INJECTION RATE | in3/sec | 65 | 77 | 65 | 81 |
| cm3/sec | 1070 | 1260 | 1060 | 1330 | |
| MAX SCREW SPEED | RPM | 110 | 101 | 101 | 90 |
| RPM | 110 | 101 | 101 | 90 | |
| PLASTICIZING RATE (GPPS) | oz/sec | 5 | 6 | 6.7 | 7.5 |
| g/sec | 147 | 164 | 164 | 150 | |
| GENERAL DATA | |||||
| *CORE VOLUME CLAMP STOP | gpm | 38 | |||
| L | 144 | ||||
| *CORE VOLUME ON THE FLY | gpm | 38 | |||
| L | 144 | ||||
| RUNNING LOAD @ 460V | amps | ||||
| amps | |||||
| COOLING WATER REQUIRED | gal | 28 | |||
| L | 105 | ||||
| MOTOR | HP | 180 | |||
| kw | 135 | ||||
| OIL RESERVOIR CAPACITY | gal | 555 | |||
| l | 2101 | ||||
| SHIPPING WEIGHT (EST.) | Lbs | 140,800 | 145,200 | ||
| kg | 64,000 | 66,000 | |||
| DIMENSIONS (L x W x H) | ft | 33.5x10x8.8 | 35.5x10x8.8 | ||
| m | 10.2x3x2.7 | 10.8x3x2.7 | |||
