| HYDRAULIC INJECTION MOLDING MACHINE SPECIFICATIONS | ||||
| CLAMP UNIT | UNITS | MODEL ISF3850D | ||
| CLAMP CLOSING FORCE | tons-US | 3850 | ||
| tons-m | 3500 | |||
| CLAMP OPENING FORCE | tons-US | 220 | ||
| tons-m | 200 | |||
| TIE BAR SPACING (H x V) | in | 74.8 x 70.8 | ||
| mm | 1900X 1800 | |||
| PLATEN DIMENSION (H x V) | in | 126 x 96.5 | ||
| mm | 3200 X 2450 | |||
| CLAMP STROKE | in | 70.9~106.3 | ||
| mm | 1800~2700 | |||
| DAYLIGHT (OPEN/CLOSE) | in | 110.2~145.7 / 39.4~74.8 | ||
| mm | 2800~3700 / 1000~1900 | |||
| CLAMP SPEED (CLOSE/OPEN) | in/sec | 26 / 26 | ||
| mm/sec | 670 / 670 | |||
| EJECTOR FORCE | tons-US | 76 | ||
| tons- m | 69 | |||
| EJECTOR STROKE | in | 13.8 | ||
| mm | 350 | |||
| INJECTION UNIT | 200A | 315A | 315B | |
| INJECTION CAPACITY (GPPS) | oz | 384 | 570 | 726 |
| g | 10890 | 16260 | 20590 | |
| SCREW DIAMETER | in | 5.5 | 6.3 | 7.1 |
| mm | 140 | 160 | 180 | |
| INJECTION VOLUME | in3 | 722 | 1078.04878 | 1365 |
| cm3 | 11840 | 17680 | 22380 | |
| INJECTION PRESSURE | PSI | 24800 | 25200 | 19900 |
| kgf/cm2 | 1740 | 1770 | 1400 | |
| INJECTION RATE | in3/sec | 65 | 82 | 104 |
| cm3/sec | 1070 | 1350 | 1710 | |
| MAX SCREW SPEED | RPM | 90 | 73 | 70 |
| RPM | 90 | 73 | 70 | |
| PLASTICIZING RATE (GPPS) | oz/sec | 7.5 | 7.5 | 10 |
| g/sec | 150 | 208 | 170 | |
| GENERAL DATA | ||||
| *CORE VOLUME CLAMP STOP | gpm | 38 | ||
| L | 144 | |||
| *CORE VOLUME ON THE FLY | gpm | 38 | ||
| L | 144 | |||
| RUNNING LOAD @ 460V | amps | |||
| amps | ||||
| COOLING WATER REQUIRED | gal | 28 | ||
| L | 105 | |||
| MOTOR | HP | 275 | ||
| kw | 239 | |||
| OIL RESERVOIR CAPACITY | gal | 1480 | ||
| l | 5602 | |||
| SHIPPING WEIGHT (EST.) | Lbs | 468,600 | 484,000 | 484,000 |
| kg | 213,000 | 220,000 | 220,000 | |
| DIMENSIONS (L x W x H) | ft | 50.5x15.7x13.5 | 52x15.7x13.5 | 52x15.7x13.5 |
| m | 15.4x4.8x4.1 | 15.9x4.8x4.1 | 15.9x4.8x4.1 | |
