Larger Image

HYDRAULIC INJECTION MOLDING MACHINE SPECIFICATIONS
CLAMP UNIT UNITS MODEL ISF2450D
CLAMP CLOSING FORCE tons-US 2420
  tons-m 2200
CLAMP OPENING FORCE tons-US 182
  tons-m 165
TIE BAR SPACING (H x V) in 70.8 x 63.0
  mm 1800 X 1600
PLATEN DIMENSION (H x V) in 96.5 x 88.6
  mm 2450 X 2250
CLAMP STROKE in 70.9~102.4
  mm 1800~2600
DAYLIGHT (OPEN/CLOSE) in 106.3~137.8 / 35.4~66.9
  mm 2700~3500 / 900~1700
CLAMP SPEED (CLOSE/OPEN) in/sec 31 / 32
  mm/sec 775 / 810
EJECTOR FORCE tons-US 76
  tons- m 69
EJECTOR STROKE in 13.8
  mm 350
INJECTION UNIT 150A 150B 200A 315A 315B
INJECTION CAPACITY (GPPS) oz 277 348 384 570 726
  g 7750 9730 10890 16260 20590
SCREW DIAMETER in 4.9 5.5 5.5 6.3 7.1
  mm 125 140 140 160 180
INJECTION VOLUME in3 514 645 722 1078 1365
  cm3 8430 10570 11840 17680 22380
INJECTION PRESSURE PSI 24900 19900 24800 25200 19900
  kgf/cm2 1750 1400 1740 1770 1400
INJECTION RATE in3/sec 65 81 65 82 104
  cm3/sec 1060 1330 1070 1350 1710
MAX SCREW SPEED RPM 101 90 90 73 70
  RPM 101 90 90 73 70
PLASTICIZING RATE (GPPS) oz/sec 6.7 7.5 7.5 7.5 10
  g/sec 164 150 150 208 170
GENERAL DATA            
*CORE VOLUME CLAMP STOP gpm 38
  L 144
*CORE VOLUME ON THE FLY gpm 38
  L 144
RUNNING LOAD @ 460V amps  
  amps  
COOLING WATER REQUIRED gal 28
  L 105
MOTOR HP 240
  kw 172
OIL RESERVOIR CAPACITY gal 980
  l 3710
SHIPPING WEIGHT (EST.) Lbs 319,000 330,000 345,400
  kg 145,000 150,000 157,000
DIMENSIONS (L x W x H) ft 44x13x12 44.3x13x12 44x13x12
  m 13.4x4x3.6 13.5x4x3.6 14.5x4x3.6

NEXT