Larger Image

HYDRAULIC INJECTION MOLDING MACHINE SPECIFICATIONS
CLAMP UNIT UNITS MODEL ISF1950D
CLAMP CLOSING FORCE tons-US 1980
  tons-m 1800
CLAMP OPENING FORCE tons-US 154
  tons-m 140
TIE BAR SPACING (H x V) in 70.3 x 58.5
  mm 1785 X 1485
PLATEN DIMENSION (H x V) in 96.5 x 84.6
  mm 2450 X 2150
CLAMP STROKE in 66.9~94.5
  mm 1700~2400
DAYLIGHT (OPEN/CLOSE) in 98.4~126 / 31.5~59.1
  mm 2500~3200 / 800~1500
CLAMP SPEED (CLOSE/OPEN) in/sec 29 / 31
  mm/sec 745 / 775
EJECTOR FORCE tons-US 49
  tons- m 44
EJECTOR STROKE in 9.8
  mm 250
INJECTION UNIT 110A 110B 150A 150B 200A
INJECTION CAPACITY (GPPS) oz 213 250 277 348 384
  g 6040 7140 7750 9730 10890
SCREW DIAMETER in 4.5 4.9 4.9 5.5 5.5
  mm 115 125 125 140 140
INJECTION VOLUME in3 400 473 514 645 722
  cm3 6560 7760 8430 10570 11840
INJECTION PRESSURE PSI 25100 21200 24900 19900 24800
  kgf/cm2 1760 1490 1750 1400 1740
INJECTION RATE in3/sec 65 77 65 81 65
  cm3/sec 1070 1260 1060 1330 1070
MAX SCREW SPEED RPM 110 101 101 90 90
  RPM 110 101 101 90 90
PLASTICIZING RATE (GPPS) oz/sec 5.3 5.9 6.7 7.5 7.5
  g/sec 147 164 164 150 150
GENERAL DATA            
*CORE VOLUME CLAMP STOP gpm 38
  L 144
*CORE VOLUME ON THE FLY gpm 38
  L 144
RUNNING LOAD @ 460V amps  
  amps  
COOLING WATER REQUIRED gal 28
  L 105
MOTOR HP 180
  kw 135
OIL RESERVOIR CAPACITY gal 845
  l 3199
SHIPPING WEIGHT (EST.) Lbs 215,600 220,000 226,600
  kg 98,000 100,000 103,000
DIMENSIONS (L x W x H) ft 38.4x12x12   39.4x12x10.5 40x12x10.5
  m 11.7x3.7x3.2 12x3.7x3.2 12.2x3.7x3.2

NEXT