AC SERVO ELECTRIC INJECTION MOLDING MACHINE SPECIFICATIONS

CLAMPING UNIT	UNITS	MODEL EC500NII-26		MODEL EC500NII-36
Clamp Force	tons-US	496		496
	tons-m	450		450
Tie Bar (H*V)	in	34.3 x 31.9		34.3 x 31.9
	mm	870 x810		870 x810
Platen Dimensions	in	48.4 x 45.7		48.4 x 45.7
	mm	1230 x 1160		1230 x 1160
Clamp Stroke	in	31.5		31.5
	mm	800		800
Mold Height (min-max)	in	13.8 - 29.5		13.8 - 29.5
	mm	350-750		350-750
Daylight (max)	in	61.0		61.0
	mm	1550		1550
Ejector Force	tons-US	14.3		14.3
	tons- m	13.0		13.0
Ejector Stroke	in	7.09		7.09
	mm	180		180
INJECTION UNIT		26AT	26B	36AT	36B
Shot size (GPPS)	oz	43.39	56.79	61.02	77.25
	g	1230	1610	1730	2190
Screw Diameter	in	2.76	3.15	3.15	3.54
	mm	70	80	80	90
Injection Volume	in3	82.2	107.4	107.4	135.9
	cm3	1347	1759	1759	2227
Screw Stroke	in	13.8		14.8
	mm	350		375
Injection Pressure	PSI	27600	21200	27600	21800
	MPa	190	146	190	150
Holding Pressure (max)	PSI	23200	17800	23200	18300
	MPa	160	123	160	126
Injection Rate	in3/sec	37.6	49.1	32.9	42.9
	cm3/sec	616	804	539	704
Injection Speed	in/sec	6.3		5.5
	mm/sec	160		140
Injection Rate (Option)	in3/sec	N/A	N/A	N/A	N/A
	cm3/sec	N/A	N/A	N/A	N/A
Injection Speed (Option)	in/sec	N/A		N/A
	mm/sec	N/A		N/A
Screw Speed	RPM	180	170	170	150
	RPM	180	170	170	150
Plasticizing Cap. (GPPS)	oz/sec	2.55	3.33	3.33	3.92
	g/sec	72.2	94.4	94.4	111.1
Nozzle touch force	tons-US	5.0		6.6
	tons- m	4.5		6.0
GENERAL
Apparent power	kVA	118.5		134.8
Weight (est)	lbs	60600		69400
	kg	27500		31500
Dimensions (LWH) (est)	ft	27.6x6.9x8.2		29.2x6.9x8.2
	m	8.4x2.1x2.5		8.9x2.1x2.5