AC SERVO ELECTRIC INJECTION MOLDING MACHINE SPECIFICATIONS

CLAMPING UNIT	UNITS	MODEL EC310NII-8			MODEL EC310NII-17
Clamp Force	tons-US		309			309
	tons-m		280			280
Tie Bar (H*V)	in		28.7 x 28.7			28.7 x 28.7
	mm		730 x730			730 x730
Platen Dimensions	in		40.5 x 40.5			40.5 x 40.5
	mm		1030 x 1030			1030 x 1030
Clamp Stroke	in		25.6			25.6
	mm		650			650
Mold Height (min-max)	in		12.6 - 26.3			12.6 - 26.3
	mm		320-670			320-670
Daylight (max)	in		52.0			52.0
	mm		1320			1320
Ejector Force	tons-US		6.6			6.6
	tons- m		6.0			6.0
Ejector Stroke	in		5.91			5.91
	mm		150			150
INJECTION UNIT		8Y	8A	8B	17Y	17AT	17B
Shot size (GPPS)	oz	10.30	12.73	15.41	19.12	27.51	37.46
	g	292	361	437	542	780	1062
Screw Diameter	in	1.77	1.97	2.17	1.97	2.36	2.76
	mm	45	50	55	50	60	70
Injection Volume	in3	19.4	24.0	29.0	24.0	34.5	47.0
	cm3	318	393	475	393	565	770
Screw Stroke	in		7.9			11.8
	mm		200			300
Injection Pressure	PSI	35800	29000	23900	41800	29000	21300
	MPa	247	200	165	288	200	147
Holding Pressure (max)	PSI	35800	29000	23900	41800	29000	21300
	MPa	247	200	165	288	200	147
Injection Rate	in3/sec	15.5	19.2	23.2	15.5	19.2	23.2
	cm3/sec	255	314	380	255	314	380
Injection Speed	in/sec		6.3			6.3
	mm/sec		160			160
Injection Rate (Option)	in3/sec	19.4	24.0	29.0	19.4	24.0	29.0
	cm3/sec	318	393	475	318	393	475
Injection Speed (Option)	in/sec		7.9			7.9
	mm/sec		200			200
Screw Speed	RPM	285	255	230	255	210	180
	RPM	285	255	230	255	210	180
Plasticizing Cap. (GPPS)	oz/sec	1.18	1.57	1.86	1.57	2.16	2.56
	g/sec	33.3	44.4	52.8	44.4	61.1	72.5
Nozzle touch force	tons-US		2.8			3.3
	tons- m		2.5			3.0
GENERAL
Apparent power	kVA		48.1			60.8
Weight (est)	lbs		35700			38100
	kg		16200			17300
Dimensions (LWH) (est)	ft		22.0x6.1x7.0			23.6x6.1x7.0
	m		6.8x1.9x2.2			7.2x1.9x2.2