| SPECIFICATION | Unit | DC800CL | |
| Die Close | Die Locking force | kN | 7840(800tons) |
| Platen Dimension (VxH) | mm | 1400 x 1400 | |
| Tie Bar Spacing (VxH) | mm | 930 x 930 | |
| Tie Bar diameter | mm | 180 | |
| Die Thickness | mm | 400 - 950 | |
| Die Stroke | mm | 760 | |
| Injection | Maximum Injection Force | kN | 598(61tons) |
| Pressure intensification ratio | 1 : 2.56 | ||
| Plunger Stroke | mm | 750 | |
| Tip Projection | mm | 350 | |
| Injection port position | mm | -250 | |
| Injection Speed | m/s | 0.1 - 5.0 | |
| Tip diameter | mm | 80 - 100 | |
| Ejection | Ejection Force | kN | 371(37.9tonf) |
| Ejection Stroke | mm | 10 - 125 | |
| Hydraulic | Moving Core Valve | 3/4" X 2 | |
| Moving core Ports | 3/4" X 4sets | ||
| FIX Core Valve | 3/4" X 1 | ||
| FIX core Ports | 3/4" X 2sets | ||
| Hydraulic System Pressure | MPa | 15 | |
| Required Hydraulic oil Quantity | liter | 1100 | |
| Hydraulic tank capacity | liter | 950 | |
| Electrical | For Hydraulic Pump | kW | 45 |
| Electrical capacity | kVa | 75 | |
| Size | Required floor space | mm | 8550 x 2480 |
| Machine height | mm | 4130 | |
| Machine mass | ton | 39 | |
