| SPECIFICATION | Unit | DC650CL-HT | |
| Die Close | Die Locking force | kN | 6370(650tonf) |
| Platen Dimension (VxH) | mm | 1200 x 1200 | |
| Tie Bar Spacing (VxH) | mm | 850 x 850 | |
| Tie Bar diameter | mm | 160 | |
| Die Thickness | mm | 350 - 900 | |
| Die Stroke | mm | 660 | |
| Injection | Maximum Injection Force | kN | 549(56tons) |
| Pressure intensification ratio | 1 : 2.52 | ||
| Plunger Stroke | mm | 670 | |
| Tip Projection | mm | 300 | |
| Injection port position | mm | -175 | |
| Injection Speed | m/s | 0.1 - 10 | |
| Tip diameter | mm | 75 - 95 | |
| Ejection | Ejection Force | kN | 294(30tons) |
| Ejection Stroke | mm | 10 - 125 | |
| Hydraulic | Moving Core Valve | 1/2" x 2 | |
| Moving core Ports | 3/4" x 4set | ||
| FIX Core Valve | 1/2" x 1 | ||
| FIX core Ports | 3/4" x 2set | ||
| Hydraulic System Pressure | MPa | 15 | |
| Required Hydraulic oil Quantity | liter | 900 | |
| Hydraulic tank capacity | liter | 750 | |
| Electrical | For Hydraulic Pump | kW | 37 |
| Electrical capacity | kVa | 60 | |
| Size | Required floor space | mm | 8040 x 2090 |
| Machine height | mm | 3430 | |
| Machine mass | ton | 28.7 | |
