| SPECIFICATION | Unit | DC250J-MT | |
| Die Close | Die Locking force | kN | 2500(255tons) |
| Platen Dimension (VxH) | mm | 850 x 850 | |
| Tie Bar Spacing (VxH) | mm | 580 x 580 | |
| Tie Bar diameter | mm | 110 | |
| Die Thickness | mm | 300 - 600 | |
| Die Stroke | mm | 360 | |
| Injection | Maximum Injection Force | kN | 270(27tons) |
| Pressure intensification ratio | 1 : 1.94 | ||
| Plunger Stroke | mm | 415 | |
| Tip Projection | mm | 230 | |
| Injection port position | mm | -125 | |
| Injection Speed | m/s | 0.05 - 10 | |
| Tip diameter | mm | 50 - 70 | |
| Ejection | Ejection Force | kN | 124 |
| Ejection Stroke | mm | 20 - 80 | |
| Hydraulic | Moving Core Valve | 3/8 x 1 | |
| Moving core Ports | 3/4" x 4set | ||
| FIX Core Valve | |||
| FIX core Ports | |||
| Hydraulic System Pressure | MPa | 15 | |
| Required Hydraulic oil Quantity | liter | 430 | |
| Hydraulic tank capacity | liter | 330 | |
| Electrical | For Hydraulic Pump | kW | 22 |
| Electrical capacity | kVa | 40 | |
| Size | Required floor space | mm | 5530 x 1710 |
| Machine height | mm | 2740 | |
| Machine mass | ton | 9.4 | |
