| SPECIFICATION | Unit | DC135H | |
| Die Close | Die Locking force | kN | 1323(135tonf) |
| Platen Dimension (VxH) | mm | 680 x 680 | |
| Tie Bar Spacing (VxH) | mm | 460 x460 | |
| Tie Bar diameter | mm | 85 | |
| Die Thickness | mm | 250 - 500 | |
| Die Stroke | mm | 350 | |
| Injection | Maximum Injection Force | kN | 162(16.5tonf) |
| Pressure intensification ratio | 1 : 1.93 | ||
| Plunger Stroke | mm | 260 | |
| Tip Projection | mm | 120 | |
| Injection port position | mm | -100 | |
| Injection Speed | m/s | 0.1 - 4.5 | |
| Tip diameter | mm | 45 - 60 | |
| Ejection | Ejection Force | kN | 74(7.6tonf) |
| Ejection Stroke | mm | 20 - 75 | |
| Hydraulic | Moving Core Valve | 3/8 x 1 | |
| Moving core Ports | 1/2" x 2set | ||
| FIX Core Valve | |||
| FIX core Ports | |||
| Hydraulic System Pressure | MPa | 15 | |
| Required Hydraulic oil Quantity | liter | 250 | |
| Hydraulic tank capacity | liter | 200 | |
| Electrical | For Hydraulic Pump | kW | 15 |
| Electrical capacity | kVa | 23 | |
| Size | Required floor space | mm | 3480 x 1660 |
| Machine height | mm | 2300 | |
| Machine mass | ton | 4 | |